OConnor seminar control panel

To Use Classroom Computer with Projector

  • To display the computer image on the projector, use the Control Panel on the lectern. (Pictured above)
  • Press Display On button. The button will blink, indicating that the projector is slowly turning on.
  • Press the PC button on control panel.
  • The computer's image will appear on screen. 
  • Log into the computer.
  • Adjust volume with volume knob on control panel and/or task bar on the computer.
  • To temporarily mute the image, press the PIC MUTE button on the control panel.
  • When finished, log off computer, then press the Display Off button on the control panel, holding it at least 2 seconds until it starts blinking.

To Use a Laptop with the Projector

  • Plug the VGA cable into the VGA port of your laptop.  (If you have a Mac, you will need the use the tethered white VGA adapter.)
  • If you have audio in your presentation, plug the mini-audio cable into the headphones jack of your laptop.  Turn on the laptop.
  • To display the laptop image on the projector, use the Control Panel on the lectern. (Pictured above)
  • Press the Display On button. The button will blink, indicating that the projector is slowly turning on.
  • Press the "Laptop" button.
  • Laptop image will appear on the screen.
  • Adjust audio using the volume icon in the computer's task bar, as well as the volume icons on the Extron touch panel.  
  • To temporarily blank the projected image, without turning off the projector, press the "PIC Mute" button.
  • When finished, log off the laptop and turn off the projector by pressing the "Display Off" button

To Use Apple TV

  • At the lectern, there is an Extron touch panel.  Press and hold (for 2 seconds) the Display ON button.
  • Push the "Apple TV" button.
  • Apple TV provides the ability to wirelessly project the contents of your iPhone, iPad, or MacBook laptop to the projector.
  • Your laptop or device must be connected to the "Kenyon Devices" wifi network in order to communicate with the Apple TV.
  • Once connected to "Kenyon Devices", select the AirPlay icon at the top of your laptop screen (looks like a rectangle with a black triangle) and then select "OCOSEM Apple TV."  For iOs devices, swipe up from the bottom of your screen to access the Control Center, and select the AirPlay icon.
  • (Instructions for doing this should have appeared on the projector screen once you select "Apple TV" on the touch panel.)
  • Your device's image should now appear on the projector screen.
  • When finished, press the AirPlay icon again to disconnect.  Then, turn off the projector by pressing the "Display Off" button at the top of the control panel. 

To Show A DVD or Blu-Ray disc

  • The Blu-Ray DVD player is located inside the lectern.  It can play either standard DVDs or Blu-ray discs.
  • Press the eject button on the front of the Blu-Ray player and put your disc in.
  • At the lectern, there is an Extron touch panel.  Press and hold (for 2 seconds) the Display ON button.
  • Please wait while the projector starts up.
  • In the middle of the Extron touch panel (pictured above), there are source icons.  Push the "Blu Ray" button.
  • Use the provided remote control to access DVD menu items and play the disc.
  • Adjust the volume using the volume knob on the control panel.
  • When finished, turn off the projector by pressing the "Display Off" button
  • Eject the DVD.

To Show A VHS Videotape

  • Turn on DVD/VCR player, located inside the lectern. Insert VHS tape.
  • Press Display On button. The projector will slowly turn on.
  • Press the VCR button on Control Panel.
  • Ensure that the VCR indicator on the front of the DVD/VCR player says VCR. (If if says DVD, you can press the Mode button on the control panel to select VCR, or press DVD/VCR on the remote control.)
  • Operate the VCR player with the provided remote control or the buttons on the right side of the Extron control panel.
  • Adjust volume with volume knob on control panel.
  • To temporarily mute the image, press the PIC MUTE button on the control panel.
  • When finished, press the Display Off button, holding it at least 2 seconds until it starts blinking. Eject tape and turn off VCR player.

More Information

For further assistance, please contact the HelpLine at (740) 427-5700