Hayes (RBH) 311 classroom

Hayes 311

To Use Desktop Computer with LCD Projector

  • To display computer image on projector, use the Control Panel on top of instructor station. (Pictured above)
  • Press Display On button. Button will blink, indicating that the projector is slowly turning on.
  • Press PC button on input selector of control panel.
  • The computer image should appear on screen. 
  • Adjust volume, if needed, with volume knob on control panel.  (On Mosfet Amplifier: Volume 1 & 2 should be at 12 o'clock position.)
  • When finished, log off computer, then press the Display Off button, holding it at least 2 seconds until it starts blinking. Projector will then turn off.

To Use Laptop with Projector

  • There is a VGA and an HDMI laptop cable on top of the instructor station. Plug either laptop cable into laptop's external monitor jack, and connect the audio cable to the headphones jack on your laptop, if desired.
  • Turn on laptop.
  • To display laptop image on projector, use the Control Panel on top of instructor station. (Pictured above)
  • Press Display On button. Button will blink, indicating that the projector is slowly turning on.
  • Press VGA or HDMI button on control panel input selector, depending on your chosen connection method.
  • Laptop image should appear on screen. If image is not optimal, press the Auto Image button on the control panel.
  • Adjust volume, if needed, with volume knob on control panel.
  • When finished, turn off and unplug laptop, then press the Display Off button, holding it at least 2 seconds until it starts blinking. Projector will then turn off.

To Show A DVD

  • Turn on DVD/BluRay player, located inside the instructor station. Insert DVD (This unit can play either standard or BluRay DVDs).
  • To display DVD image on projector, use Control Panel on top of instructor station. (Pictured above)
  • Press Display On button. Wait until light stops blinking.
  • Press the BluRay button on Control Panel input selector. 
  • Operate DVD player with buttons on the top control panel, or the provided remote control.
  • Adjust volume, if needed, with volume knob on control panel.
  • When finished, press the Display OFF button, holding it at least 2 seconds until it starts blinking. Eject DVD and turn off DVD player.

To use Document Camera

  • On control panel, press Display On button. Button will blink, indicating that the Data projector is slowly turning on.
  • Press the DOC CAM button.
  • Turn on the power switch on the top of unit.  Place your visual item on the table under the Doc Cam lens.
  • Press the Zoom Tele or Wide buttons to move in closer or farther away from the object or document.
  • When finished, turn off document camera.  Press the Display OFF button on top control panel, holding it at least 2 seconds until it starts to blink.

To Use Apple TV

  • On control panel, press Display On button. Button will blink, indicating that the Data projector is slowly turning on.
  • Push the "Apple TV" button.
  • Apple TV provides the ability to wirelessly project the contents of your iPhone, iPad, or Mac laptop to the projector.
  • Your laptop or device must be connected to the "Kenyon Devices" wifi network in order to communicate with the Apple TV.
  • Once connected to "Kenyon Devices", select the AirPlay icon at the top of your laptop screen (looks like a rectangle with a black triangle) and then select "RBH 311 Apple TV."  For iOs devices, swipe up from the bottom of your screen to access the Control Center, and select the AirPlay icon.
  • (Instructions for doing this should have appeared on the projector screen once you select "Apple TV" on the touch panel.)
  • Your device's image should now appear on the projector screen.
  • When finished, press the AirPlay icon to disconnect and turn off the projector by pressing the "Display Off" button at the top of the control panel. 

More Information

For further assistance, please contact the HelpLine at (740) 427-5700