To Use Desktop Computer with LCD Projector

  • Turn on computer and log in. There is a wireless keyboard/trackpad available for control from any location in the room. (There is also a wired keyboard available.)
  • On the control panel, Press the Display On button. 
  • Press PC button.
  • Computer image should appear on screen.
  • Adjust volume, if needed, with volume knob and volume icon on the computer's taskbar.
  • If you need to temporarily darken the screen, press the PIC MUTE button.
  • When finished, log off the computer, then press the Display Off button.

To Use Wireless Keyboard

  • Remove wireless keyboard from the charging base.
  • Ensure that On/Off switch on upper right side is set to On (orange dot will appear.)
  • Place keyboard at desired location on the seminar table.
  • To move the cursor, use your finger on the round trackpad on lower right of keyboard.  (To Click, double tap on trackpad.)
  • To scroll vertically, place your finger on the white dot on the trackpad, and then turn clockwise to scroll down and counterclockwise to scroll up.
  • When finished, leave keyboard power on and return it to the charging base.

To Use Laptop with Projector

  • There are two locations where one can plug in a laptop. There is a laptop cable in the cabinet under the computer and there is also one at the front of the room, near the desk.
  • Plug laptop cable into laptop's external monitor jack, and connect the audio cable to the headphones jack on your laptop.
  • Turn on laptop.
  • To display laptop image on projector, use the Control Panel at the rear cabinet, next to monitor. (Pictured above)
  • Press Display On button.
  • Press Portable PC 1 or 2 button.
  • Laptop image should appear on screen.
  • Adjust volume with knob on Control Panel.
  • When finished, turn off and unplug laptop, then press the Display Off button.

To Show A DVD

  • Turn on DVD/VCR player, located in the cabinet below the computer monitor, and insert DVD.
  • To display DVD image on projector, use Control Panel on top of cabinet, next to computer monitor. (Pictured above)
  • Press the Display On button.
  • Press the DVD button on Control Panel.
  • Operate DVD player with buttons on the control panel.
  • Adjust volume using knob on Control Panel.
  • When finished, press the Display OFF button. Eject DVD and turn off DVD player.

To Show A Video

  • Turn on DVD/VCR player, located in the cabinet below the computer monitor, and insert VHS tape.
  • To display VCR on projector, use Control Panel on top of cabinet, next to computer monitor. (Pictured above)
  • Press Display On button.
  • Press VCR button on Control Panel.
  • Operate VCR player using buttons on control panel and/or remote control.
  • Adjust volume with knob on Control Panel.
  • When finished, press the Display Off button. Eject tape and turn off VCR player.

More Information

For further assistance, please contact the HelpLine at (740) 427-5700