To Use Desktop Computer with LCD Projector

  • To display computer image on projector, use the Control Panel on top of instructor station. (Pictured above).  
  • Press and hold Display On button for two seconds. Button will blink, indicating that the projector is slowly turning on.
  • Press PC (not PC1 or PC2) button on input selector of control panel.
  • The computer image should appear on screen.
  • Adjust volume, if needed, with volume knob on control panel.
  • To temporarily mute the image, press the PIC MUTE button on the control panel.
  • When finished, log off computer, then press the Display Off button, holding it at least 2 seconds until it starts blinking.

To Use Laptop with Projector

  • There is a laptop cable next to the control panel. Plug laptop cable into laptop's external monitor jack, and connect the audio cable to the headphones jack on your laptop.
  • Turn on laptop.
  • To display laptop image on projector, use the Control Panel on top of instructor station. (Pictured above)
  • Press and hold Display On button for two seconds. Button will blink, indicating that the projector is slowly turning on.
  • Press Laptop button on control panel input selector.
  • Laptop image should appear on screen. If image is not optimal, press the Auto Image button on the control panel.
  • If needed, adjust volume with knob on Control Panel.
  • To temporarily mute the image, press the PIC MUTE button on the control panel.
  • When finished, turn off and unplug laptop, then press the Display Off button, holding it at least 2 seconds until it starts blinking. Projector will then turn off.

To Show A DVD

  • Turn on DVD/VCR player, located inside the equipment rack. Insert DVD.
  • To display DVD image on projector, use Control Panel on top of instructor station. (Pictured above)
  • Press and hold Display On button for two seconds. Button will blink, indicating that the projector is slowly turning on.
  • Press the DVD button on Control Panel input selector.
  • Insert DVD in the DVD drive.
  • Operate DVD player with buttons on the top control panel.
  • Adjust volume using knob on Control Panel.
  • When finished, press the Display OFF button, holding it at least 2 seconds until it starts blinking. Eject DVD and turn off DVD player.

To Show A VHS Videotape

  • The VCR/DVD combo player is located inside the equipment rack. Turn on VCR/DVD player and insert tape.
  • To display VCR on projector, use the Control Panel on top of instructor station. (Pictured above)
  • Press and hold Display On button for two seconds. Button will blink, indicating that the projector is slowly turning on.
  • Press VCR button on Control Panel input selector.
  • Insert VHS tape in the VCR.
  • Operate VCR player using buttons on top control panel.
  • Adjust volume with knob on Control Panel.
  • When finished, press the Display Off button, holding it at least 2 seconds until it starts blinking. Eject tape and turn off VCR player.

To Use BLU-RAY with LCD Projector

  • Turn on Extron Control Panel (pictured above) by pressing and holding ON for 2 seconds.
  • Turn on Blu-Ray control panel, located inside the equipment cabinete.
  • Insert Blu-Ray disc.
  • Switch the input display to BLURAY by pressing and holding that button on the projector control panel for 2 seconds.
  • When finished, turn off Blu-Ray player. Turn off projector by pressing and holding OFF for two seconds.

More Information

For further assistance, please contact the Helpline at (740) 427-5700