Higley 109

Picture of Extron control panel and ports found in Higley 109

To Use Classroom Laptop with LCD Projector

  • The classroom laptop is located at the instructor's lectern/shelf at the front of the room.
  • Turn on the laptop and log in.  Ensure that the VGA cable is plugged in to the laptop VGA port.  If audio is desired, plug the audio mini plug into the headphones port on the laptop.
  • To display computer image on projector, use the Control Panel pictured above. 
  • Press and hold the Display On button for two seconds. Button will blink, indicating that the projector is slowly turning on.
  • Press VGA button on input selector of control panel.
  • The computer image should appear on screen.
  • Adjust volume, if needed, with volume knob on control panel and/or the volume icon in the laptop's system bar (lower right).
  • When finished, log off computer, then press the Display Off button, holding it at least 2 seconds until it starts blinking and projector shuts off.

To Use Personal Laptop with Projector

  • Fasten the VGA cable to your laptop's VGA port.  If using a Mac laptop, you will need a VGA adapter (available for checkout at the Circulation Desk.) If audio is desired, plug the audio mini plug into the headphones port on the laptop.
  • Turn on laptop.
  • To display computer image on projector, use the Control Panel pictured above. 
  • Press and hold Display On button for two seconds. Button will blink, indicating that the projector is slowly turning on.
  • Press the VGA button on control panel input selector.
  • Laptop image should appear on screen. If image is not optimal, press the Auto Image button on the control panel.
  • If needed, adjust volume with knob on Control Panel.
  • When finished, turn off and unplug laptop, then press the Display Off button, holding it at least 2 seconds until it starts blinking. Projector will then turn off.

More Information

For further assistance, please contact the Helpline at 1-740-427-5700 or helpline@kenyon.edu.